Covers the curved screen to the edge
Able to protect the entire screen
- Able to cover entire screen
- Multi-layered architecture protects and absorbs shock
- Passed our durability test having 65g iron ball dropped from 100cm above the tempered film
- Crystal-Clear film
- Fits to the edges
- Covers the curved screen to the edges
- Round edge coating to cover to the edge
- Special silicone layer for bubble-less easy application
- No need to use glue, it is re-attachable
- “Targeting Tabs” for easy film application
- Microfiber cleaning cloth, Dust-removing tape, Squeegee card
Protects the glass display from severe impact
Shock Absorption Frame Film for iPhone 6s Plus Crystal Clear (Shock absorbing frame film) is a frame film that absorbs shock from severe impacts.
Keeping the iPhone experience alive, this film protects the beautiful specs of the display screen till the edge of screen fully. Instead of glue, a self-adhesive material is used without leaving any residue after removal.
The iPhone 6 / iPhone 6 Plus was artfully designed with curved edges; leaving traditional films failing to protect the entire screen. This film was designed to immerse the entire screen to the curved edges providing full protection.
Multi-layer structured film will absorb shock.
An iron ball weighing 65g dropped vertically from a height of 100cm did not damage the screen. ※ Results may vary depending on test conditions.
A transparent look to forget a film is in place
This Crystal Clear highly transparent film will not reduce the light and contrast quality of the device. Minimal thickness is used for the screen merely for the adhesive components of the film to boost transparency and make the film unrecognizable to the naked eye.
The most difficult part of applying a protective film are the dust and air bubbles trapped in between the screen and film. This film will remove any air bubbles and dust by simply pressing down on them.
Simplism Bubbleless Series Film is engineered with a special silicon material between the film and the display that does not allow bubbles caused by dust particles.
If dust particles appear, dust particles were absorbed by the screen prior to application. Depending on the size of the dust particle, vision may be obscured.
3 bonus products included
All included items are user friendly. The Micro-Fiber cloth removes smudges and fingerprints left on the display screen. For a complete clean, use the dust removal tape after using the Micro-Fiber cloth. To remove bubbles use the supplementary card to push out the bubbles.
With the large 90 x 55mm Dust removing tape, you can easily remove dust applying it to your entire screen twice.
Miracle seal easy application
Easily align the film with the screen with the “Miracle Seal” locating tabs locating tabs. Align the top and bottom of the film with your screen before applying.
Use targeting tabs on the Miracle seal for accurate application. Remove the protective layer of the film to expose the adhering surface.
Hold both targeting tabs and position the holes of the film over the matching holes of the phone. When everything is aligned, simple adhere the film vertically to the screen. With the targeting tabs, alignment is easy and films can be applied effortlessly without mistakes.
When the miracle seal is removed, the protectice film layer appears to be removed simultaneously.
Bubbles can be removed with the attached auxiliary card. Any remaing contamination like dust or dirt will become transparant within a few days.
- How do I apply the film accurately? Dust adhered in between the film and display surface can make it difficult to remove bubbles. To reduce any complications, use the Micro-Fiber cloth to remove smudges and fingerprints and the dust-up tape to remove any lingering dust particles. Please clean your display screen in a dust-free environment; the restroom having the least amount of dust particles is a myth. Try using the Miracle Seal locating tabs for a quick and easy application.
- Is it possible to remove the film once applied? If removed without any folds or creases, the film can be re-applied.
Model Number / UPC
Frame Film for iPhone 6s Plus Anti-glare Black
Frame Film for iPhone 6s Plus Anti-glare White
|Size||70.4 × 150.2 × 0.21mm（W × H × D）|
|Package Size||98 × 226 × 11mm（W × H × D）|
|Compatible Product||iPhone 6s Plus (5.5inch * 2015 Model)
iPhone 6 Plus (5.5inch * 2014 Model)